Bendi’s very narrow aisle 48 volt electric
- The Bendi Electric Narrow Aisle trucks are available with three stage tilting masts, with lift heights up to 36 feet (11M). Quad masts also are available to 26 feet (7.92M), which gives the Bendi high stacking ability, while allowing the low mast height necessary to work in highway trailers or travel through low doorways. Electric capacities range from 3,000 pound (1363kg) to 4,500 pound (2045kg) capacity.
Besides working in narrow aisles, the Bendis can also work in bulk storage and congested manufacturing areas, in push-back and drive in rack systems, rail cars, and outdoors. The Bendi comes standard with an 11.8 inch (300mm) stroke side shifter and can also be equipped with a variety of hydraulic attachments, such as paper roll clamps, push/pull, drum clamp, and a carton clamp to further enhance its versatility.
Bendi’s very narrow aisle internal combustion lift truck - Almost everything that makes the battery-powered Bendi the right choice for so many applications applies equally to the Bendi IC. Both are equally at home on the loading dock or in the warehouse. Both can go from trailer to plant floor to narrow aisle storage without staging. Both navigate narrow aisles with the speed and agility that allow Bendi operators to move safely into tight spots others can't reach. The main difference is that our LP-Powered Bendi can be refueled in less than 5 minutes.
This narrow aisle forklift features a GM 2.4L internal combustion engine designed specifically for LP gas. Refilling or removing and replacing the rear-mounted LP tank is easy, fast, and safe. The 2.4 liter four-cylinder engine is easily accessible under the insulated seat base. The engine is rated at 67hp at 2400rpm, and meets or exceeds emission standards for its vehicle class in all 50 states. The Bendi i4 measures just 48" (1200mm) wide, can climb 15% grades, turn in 9 foot (2.74m) intersecting aisles, and stack 48"x40" (1200mm x 1000mm) loads in 6-1/2 foot (1.98m) aisles.